Dot Matrix Printers for Invoices: Still Needed?

Summary
Dot matrix printers for multipart invoices and receipts: how they work, why e-Faktur needs no dot matrix, when they still matter, and renting one.
Dot matrix printers are still needed for multipart documents printed in a single pass: sales invoices, delivery notes, receipts and forms with carbon or NCR copies. The tax invoice itself is now an e-Faktur, an electronic document. A paper copy, if needed, prints on an ordinary printer, so no dot matrix is required.
The confusion usually arises because the word "faktur" is used for two different documents in Indonesia. This guide separates the two, explains how dot matrix printers work, when they are still worth using and when a laser printer can take over, and what to prepare when choosing or renting one. If your requirement is already clear, the available models are on the dot matrix printer rental page.
How a Dot Matrix Printer Works
A dot matrix printer is an impact printer. Its print head holds a row of pins that strike an inked ribbon against the paper, so each character is built from small dots. Because physical pressure is applied, carbon sheets or NCR (no carbon required) paper beneath the top sheet print in the same pass. Laser and inkjet printers cannot do this, because neither puts pressure on the paper.
There are two common head types:
- 9-pin, simpler and faster for plain text such as receipts and lists.
- 24-pin, which produces neater characters and suits formal documents such as invoices and delivery notes.
Speed is measured in characters per second (cps), not pages per minute. The Epson LQ line in Arental's catalogue sits at roughly 300 to 500 cps. Continuous-form paper with holes along both edges is pulled through by a tractor feed, so hundreds of sheets can print without being fed one at a time.
Another advantage that rarely gets mentioned: a ribbon lasts far longer than ink for the same amount of text, and the mechanism tolerates dusty conditions. That is why these printers survive in warehouses, production areas and dispatch desks.
Tax Invoices, e-Faktur and Dot Matrix Printers
Paper tax invoices used to be printed in several copies, at least one for the buyer and one for the seller's records. In that era a dot matrix printer with continuous-form paper was standard equipment in the finance department, and the habit of calling it a "tax invoice printer" has lasted to this day.
Today the tax invoice is the VAT document that a VAT-registered business (PKP) creates in the DJP system (the tax office's e-Faktur platform). It is signed electronically and carries a QR code for checking its data, so its validity does not depend on paper or a wet signature. When the company or the buyer needs a printed copy, the file can simply be printed on A4 paper with an ordinary laser or inkjet printer. A general explanation of VAT (PPN) is in the glossary.
So for tax invoices, a dot matrix printer is no longer necessary. What still often needs one is other commercial paperwork that is also commonly called a "faktur", particularly multipart sales invoices whose sheets are shared between several parties. The technical rules for e-Faktur are set by the Directorate General of Taxes and can change, so follow official DJP guidance or a tax adviser on tax matters.
| Document | Still needs dot matrix? | Why |
|---|---|---|
| Tax invoice (e-Faktur) | No | An electronic document from the DJP system; a paper copy prints on any printer |
| Multipart sales invoice | Yes, if each sheet goes to a different party | The white, pink and yellow sheets must be identical from one print |
| Delivery note | Often yes | One sheet stays with the sender, one travels with the goods, one returns signed by the recipient |
| Multipart receipts | Yes | The customer and the cashier hold exactly the same copy |
| Sealed payslip mailers | Yes, if that form type is used | The content prints inside the envelope through pin pressure |
| Internal records with no per-sheet signature | No | A laser printer can simply print another copy |
When a Dot Matrix Printer Is Still Needed
Genuine requirements usually fall into one of three groups.
Multipart documents with wet signatures on several copies. Delivery notes, goods handover records and warehouse forms often use this format. One copy stays with the sender, one travels with the goods, and one comes back as proof once the recipient has signed it. As long as that flow continues, physical copies are genuinely required.
Pre-printed forms and continuous paper. Many older accounting and ERP systems print onto custom-sized forms with fixed column positions. Changing the printer means changing the print layout in the system, which is sometimes more trouble than keeping the machine.
Environments that are hard on other printers. Dusty warehouses, production floors and dispatch desks where the temperature varies. An impact printer with a simple mechanism lasts longer in places like these.
The same principle is used in specialist devices such as the passbook printers in banks and cooperatives, which print directly into the book using pin pressure.
When a Laser Printer Can Take Over
Before keeping or renting a specialist machine, check whether the need still exists.
- Copies without a signature on each one. If the second and third sheets are only filed, the document can be printed twice on a laser printer without affecting its validity.
- Approvals have moved to electronic signatures. The need for physical copies disappears entirely for those documents.
- Very low volume. Keeping a specialist machine for a few sheets a week is often not worth the cost and the space.
Office printer running costs, from toner to maintenance, are compared in our article on office printer running costs. Laser printers for everyday documents are in the printer catalogue.
Checking Whether the Multipart Requirement Is Still Real
One simple check often settles the question: trace where each copy goes.
Take one multipart document and ask who holds each sheet and what happens to it. If every sheet is held by a different party and signed separately, the multipart requirement is real. If the second and third sheets end up in an archive folder that nobody ever opens, the copies are just a habit.
Ask the partners and customers who receive those documents too. Sometimes copies are kept because of assumptions about what the other party wants that were never checked. The result often shows that only one or two document types really need a dot matrix, which changes how many machines are actually required.
Choosing a Specification: Pins, Paper Width and Copies
Three decisions determine the right model.
Number of copies. The ability to strike through layers varies between models. The Epson LQ line in the catalogue handles up to 5 to 7 plies depending on the model. Pushing beyond the machine's limit produces a faint bottom copy that cannot be read. State the exact number of copies when you request a quote.
Paper width. An 80-column model takes standard continuous-form paper such as the common 9.5 × 11 inch size. A 136-column model is needed for wide forms and reports with many columns.
Head type. 24-pin for formal documents that customers will read, 9-pin for internal receipts where speed matters most.
| Requirement | Suitable choice | Example models |
|---|---|---|
| Fast text receipts | 9-pin, 80 columns | Epson LX-310 |
| Neat multipart sales invoices and delivery notes | 24-pin, 80 columns | Epson LQ-310 |
| Wide forms and multi-column reports | 24-pin, 136 columns | Epson LQ-2190, LQ-2090 |
Preparing Paper, Ribbons and Connections
Procurement of the machine often goes smoothly and then stalls on consumables and settings. A few questions at the start prevent that.
- Paper type. Cut sheets and continuous paper with tractor holes use different feed paths, and not every unit handles both comfortably.
- Ribbon supply. Make sure ribbons for the chosen model are easy to obtain throughout its use. Estimate consumption from monthly print volume and agree who supplies replacements.
- Connection to the computer. Some models still offer parallel or serial ports alongside USB. Check that the computer or print server on site has a matching port.
- System settings. Set the page length to match the form, for example 11 inches for 9.5 × 11 paper, along with the top-of-form position. Printing from a browser often drifts because of automatic scaling, so test from the accounting or ERP application you actually use.
- Paper storage. Keep paper dry, because damp paper causes jams and uneven printing.
Placing the Machine in the Workspace
An impact printer is far noisier than a laser printer because it works by striking. Place it in a separate room or away from areas that need concentration or phone calls.
Leave space behind and below the machine for the continuous paper path. A machine pushed against a wall often creases the paper and jams repeatedly. Put it on a stable surface, because vibration from the striking mechanism can make it shift. Finally, keep it close to the desk of the staff who print multipart documents every day, so nobody makes unnecessary trips back and forth.
Renting a Dot Matrix Printer for Offices and Warehouses
For seasonal needs, projects, or a transition period before documents move to an electronic format, renting makes more sense than buying a machine that may sit unused in a few years. The Epson LQ printers in Arental's catalogue have a base rate of Rp 30,000 per day or Rp 150,000 per month per unit. Exact pricing depends on model, duration and unit count; delivery charges and applicable taxes are itemised in the quote.
When you request a quote, state the document types, the number of copies, the paper width, the expected daily volume and the type of connection to the computer. Many offices use a combination: a laser printer for everyday documents and one dot matrix unit dedicated to multipart forms. Rates for other printers are on the printer rental prices page, with a summary in our article on monthly printer rental prices for offices. For warehouses that also print shipping labels, see our article on warehouse thermal printers.
Rentals are made in the name of a company, government body or organisation, and every unit is handed over with a handover record such as a BAST. Service details and the full ordering process are on the printer rental page.
Frequently Asked Questions
Do tax invoices have to be printed on a dot matrix printer?
No. The tax invoice is now an e-Faktur, an electronic document created in the DJP system. If a paper copy is needed, the file can be printed on A4 paper with an ordinary laser or inkjet printer. Dot matrix printers remain relevant for sales invoices and other commercial documents printed in multiple copies.
What are the advantages of a dot matrix printer over a laser printer?
The main advantage is printing several copies at once in a single pass, because the pins apply physical pressure to the paper. Ribbons also last longer than ink for text, the machine copes with dusty conditions, and continuous paper can run for hundreds of sheets without manual feeding. For single-sheet documents, a laser printer is faster, quieter and neater.
How many copies can a dot matrix printer produce?
It depends on the model. The Epson LX-310 is designed for one original plus four copies, while the Epson LQ line in the catalogue handles up to 5 to 7 plies. Going beyond that limit makes the bottom copy unreadable, so state the number of copies when you request a quote.
What is the difference between 9-pin and 24-pin dot matrix printers?
A 9-pin head uses fewer pins, so it is faster and suits receipts or internal lists. A 24-pin head produces smoother, neater characters, making it a better fit for sales invoices, delivery notes and documents that customers will read.
Can one office use both laser and dot matrix printers?
Very commonly. The laser printer handles everyday documents, while a single dot matrix unit prints the multipart forms. Mention both requirements when you request a quote so the configuration and unit count match.
In Short
Dot matrix printers survive because of one capability other printers lack: printing multiple copies in a single pass. Tax invoices no longer need them now that they take the form of an e-Faktur, but multipart sales invoices, delivery notes, receipts and forms often still do. Trace where each copy goes, then decide how many machines you genuinely need.
References & Sources
A manufacturer example of the copy limit: the Epson LX-310 (accessed 16 November 2026) is designed to print up to 1 original plus 4 copies in one pass. The figure differs between models, which is why the number of copies should be stated when requesting a quote. Official e-Faktur rules can be followed on the Directorate General of Taxes website, pajak.go.id (accessed 16 November 2026).